Bogen's WB1EZ Wall Baffle Speaker is an easy design speaker, used for indoor applications. The WB1EZ comes pre-assembled with an 8" cone speaker enclosed in a simulated walnut-finished wooden enclosure with a black grille cloth on front and recessed volume control.

Architect and Engineer Specifications

The surface mounting loudspeaker shall be a Bogen Model WB1EZ, or equivalent, 8" cone-type loudspeaker having a frequency response of at least 50 Hz to 12 kHz.The on axis sound pressure level shall be 95 dB, at least four feet with one-watt input. The loudspeaker shall have a six-ounce ceramic magnet and a 3/4" voice coil. The loudspeaker shall be assembled in a wall baffle for surface-mounting, angled for additional downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints.The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D [top] (3-1/4" D base).

Easy Design:

Armed with just 3 pieces of information, you can quickly create a bill of material for speaker paging jobs. Bogen’s Easy Design line of products was created specifically to make the design process easier and less time consuming for the installer. You supply some basic pieces of information – type of application, dimensions of the area to be covered, ambient noise level, and ceiling height*. Then, a few simple and direct charts will immediately provide you with the best type of speaker to use, the number of speakers needed, and the amplifier power required for the job. Each speaker in the Easy Design line is designed with a single power tap and a volume control. Any paging system you create using the Easy Design products will be flexible, robust, and powerful. If noise levels increase in the future, just turn up the volume controls on the speakers – the amplifier will not overload! You get all the benefits of a 70V central-amplified system – full power capability, high-quality sound and performance, 2-wire installation, long speaker runs, flexibility in amplifier location, no distributed power supplies – and now, super simple system design (we’ve eliminated the multiple power taps). Easy Design speakers have the high quality and reliability you expect from Bogen.

- 1-watt, single tap design

- Screw terminal connections for fast installation

- Designed for 70V amplifier output

- 8" cone speaker for excellent audio quality

- Recessed volume control

- Designed for easy wall-mount installation; face has 13.5 degree downward angle

- 50 Hz-12 kHz frequency response

- 95 dBspl @ 4ft / 1W input sensitivity

WB1EZ Dimensions:

9.5" W x 9.5" H x 5.25" D (3.25" D at bottom)

Technical Specifications:

Power Rating (RMS): 1-watt, continuous

Frequency Response: 50 Hz to 12 kHz

Impedance: 4900 ohms (for use on 70V amplifier outputs)

Sound Pressure Level: 95 dB at 4 ft. with a 1-watt input on axis

Finish: Simulated walnut vinyl

Weight: 6 lbs