Signamax Connectivity Systems’ Switching
Mini Fiber Optic Media Converters provide an intelligent solution for
fiber optic connectivity where simplicity, low cost, and minimum
footprint are the primary considerations. These converters are designed
to handle both legacy 10BaseT and 100BaseTX Fast Ethernet devices on
their twisted pair port while maintaining 100BaseFX Fast Ethernet
transmission on the fiber optic port. Plug-and-play simplicity makes
connection easy.
Each Media Converter provides a
10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with
Auto-MDIX capability for more convenient connection. Built-in 10/100
switch enables the fiber cable connection to operate at 100 Mbps
connected to either a 10BaseT or a 100BaseTX network, while remaining
completely 100BaseFX standard-compliant. Fiber connection can also
operate in full duplex mode whether the RJ-45 port is connected to a
full duplex switch or a half duplex hub.
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX
Models 065-1000/1010/1020/1020ED/1020XLD:
1
Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE
802.3u 100BaseTX standard specifications; Category 5 or better cable,
100 meters maximum distance for 100BaseTX, Category 3 or better cable,
100 meters maximum distance for 10BaseT
plus
1 fiber optic port
meeting IEEE 802.3u 100BaseFX standard specification; 62.5/125 or 50/125
micron multimode fiber optic cable, 2,000 meters maximum distance
or
1
fiber optic port meeting IEEE 802.3u 100BaseFX standard specification;
9/125 micron singlemode fiber optic cable, spanning: 20 kilometers
maximum distance (Model 065-1020)
or
40 kilometers maximum distance (Model 065-1020ED)
or
75 kilometers maximum distance (Model 065-1020XLD)
Per Port: FX LNK/ACT, TX LNK/ACT
Two LEDs total
Latency: < 4.2 µs (LIFO)
Throughput @ 100Base: 148,809 pps (64-byte packets)
Speed: 100BaseTX: 100/200 Mbps for half/full duplex; 10BaseT: 10/20 Mbps for half/full duplex
Switching Method: Store-and-Forward
- FIBER INTERFACE, MULTIMODE MODELS
Type: LED
Wavelength: 1300 nm nominal (1270 nm maximum, 1380 nm minimum)
Maximum Output Power: - 14.0 dBm
Minimum Output Power: - 20.0 dBm
Sensitivity: -33.0 dBm
Maximum Input Power: - 8.0 dBm
Link Power Budget: 13.0 dB
- FIBER INTERFACE, SINGLEMODE PN 065-1020
Type: MQW Laser
Wavelength: 1300 nm nominal (1260 nm maximum, 1360 nm minimum)
Maximum Output Power: - 7.0 dBm
Minimum Output Power: - 15.0 dBm
Sensitivity: -34.0 dBm
Maximum Input Power: - 7.0 dBm
Link Power Budget: 19.0 dB
- FIBER INTERFACE, SINGLEMODE PN 065-1020ED
Type: MQW Laser
Wavelength: 1300 nm nominal (1261 nm maximum, 1360 nm minimum)
Maximum Output Power: - 5.0 dBm
Minimum Output Power: - 12.0 dBm
Sensitivity: -35.0 dBm
Maximum Input Power: - 5.0 dBm
Link Power Budget: 23.0 dB
- FIBER INTERFACE, SINGLEMODE PN 065-1020XLD
Type: MQW Laser
Wavelength: 1300 nm nominal (1270 nm maximum, 1350 nm minimum)
Maximum Output Power: + 3.0 dBm
Minimum Output Power: - 3.0 dBm
Sensitivity: -37.0 dBm
Maximum Input Power: - 0.0 dBm
Link Power Budget: 34.0 dB
Case dimensions: 3.15"L x 2.13"W x 0.87"H (80mm x 54mm x 22mm)
Fiber connector protrusion varies with model.
Weight: 0.27 pounds (122 grams)
- ENVIRONMENTAL CHARACTERISTICS
Operating Temperature: 32°F ~ 104°F (0°C ~ 40°C)
Storage Temperature: -13°F ~ 158°F (-25°C ~ 70°C)
Relative Humidity: 10 ~ 90%, non-condensing
External power adapter: 5 Volts DC; 1.0 A
Power Consumption: 5 Watts Maximum
FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark
UL Listed
Lifetime
