HS-12 Thermal Stripper for Both Single and Ribbon Fiber Cable

Reference#: 76509
Item#: FF-HS-12


The FiberFox HS-12 newly developed hand-held thermal stripper is rugged and durable, yet small in size and light weight. Designed to strip the jacket of single fiber and ribbon cable up to 12 fibers (fiber holders sold separately), it offers extreme convenience under any tough environment. Benefits include fast heating time of 4 seconds and approximately 500 cycles with a fully charged battery. So easy to use that anyone can do clear stripping with near zero failure.

Fiber Holders Sold Separately:
- FH-250 250um Fiber Holder
- FH-900 900um Fiber Holder
- Call for other sizes

* Note: The HS-12 is a direct replacement for the T-1000


  • HS-12 Long-lasting Thermal Stripper for both ribbon fiber and single fiber cable
  • World’s fastest heating time of 4sec
  • Long lasting battery: Approximately. 500 times with a full charged battery by simple operation


Fiber MaterialSilica glass
Coating MaterialUV cured resin
Coating Thickness“Single fiber: 0.25~0.4mm 2 to 12 Ribbon fiber: 0.3~0.4mm”
Cladding Diameter125μm
Coating Removal Lengthmax 30mm
Heating ModeNormal mode / Power save mode
Temperature SettingsNormal mode: approx. 80℃, 95℃, 110℃, 130℃
Power save mode: approx. 70℃, 80℃, 95℃, 110℃
Fiber Holder TypeFH-2, FH-4, FH-6, FH-8, FH-10, FH-12, FH-250, FH-900,
FH-U (Universal Holder both for 250μm and 900μm)
Power Supply Method1) AC drive: AC100~240V, 50/60Hz
2) DIN port: DC 12V power supplied from fusion splicer
Operating ConditionTemperature: 0℃~40℃ / Humidity: 0%~95%
Applicable Fiber TypeSingle fiber: 250μm, 900μm, 3.0mm fiber cable and flat cable
Ribbon fiber: 2 to 12 ribbon fiber cable
Heating TimeApprox. 4~5sec at normal mode
Approx. 5~6sec at save mode
Battery CapacityApprox. 500 stripping with 12 ribbon fiber with a full charged battery